Door Alignment; After Leveling The Door Height - Kenmore 5881 - 26.5 cu. Ft. Refrigerator Use & Care Manual

DOOR ALIGNMENT ADDITIONAL ADJUSTMENT
NOTE: If after leveling the refrigerator (see LEVELING
THE REFRIGERATOR) the doors are still misaligned
follow the directions below.
Before adjusting the doors, remove the Base Grille.
See BASE GRILLE INSTALLATION for reference.
If the freezer compartment door is lower than the
refrigerator compartment door, align them by inserting
a flat blade screwdriver into the groove of the left
leveling leg and rotating it clockwise.
Left leveling
leg
If the freezer compartment door is higher than the
refrigerator compartment door, align them by inserting
a flat blade screwdriver into the groove of the right
leveling leg and rotating it clockwise.
(
iiiiii_iiiiiil
)
Height
difference
Right leveling leg
If rotating the leveling legs does not result in satisfactory
door alignment, you may fine tune the alignment by
adjusting the right door adjustment hinge pin.
Tools you need
• Wrench 5/16 in (8 mm)
Height
difference
Using a 5/16 in (8mm) wrench, turn the adjustment
hinge pin clockwise or counterclockwise to align the
refrigerator with the freezer door.
Do not over tighten the door adjustment pin. The
hinge pin can be pulled out. (Adjustable range of height is a
maximum of ½" (1.27 cm)).
AFTER LEVELING THE DOOR HEIGHT
Make sure the front leveling legs are completely
touching the floor.
12