Advertisement
This lights anytime the oven has been
programmed using the Cooking Time or Start
Time functions.
Touch this pad to turn the oven light on or off.
Short taps to this pad will decrease the time or
temperature by small amounts. Touch and hold
the pad to decrease the time or temperature by
larger amounts.
Short taps to this pad will increase the time or
temperature by small amounts. Touch and hold
the pad to increase the time or temperature by
larger amounts.
Touch this pad to select the self-cleaning
function. See the
section.
Flashes while in edit mode—you can change the
length of time for the self-clean cycle at this
point. Glows when the oven is in the self-clean
cycle. After the self-clean cycle, the light will turn
off. When the light is off, slide the latch handle to
the left as far as it will go and open the door. If
your range does not have a latch, the door will
unlock automatically.
Touch this pad to cancel ALL oven operations
except the clock and timer.
Touch this pad to select the broil function.
Flashes while in edit mode—you can switch from
Hi to Lo Broil at this point. Glows when the oven
is in broil mode.
Edit mode lasts several seconds after the last
pad press. Start Time and Cooking Time will
be the only pads lit if either of these options is
selected. (Example: Start Time is selected with
Bake—the Start Time pad will remain lit until the
clock reaches the programmed time, at which
point it will turn off and the Bake/Temp Recall
pad light will light up).
ge.com
13
Advertisement
