Installing Textbridge Pro - ScanSoft TEXTBRIDGE PRO 11 Manual

I T
NSTALLING
TextBridge Pro 11's installation program takes you through installation
with instructions on every screen.
Before installing TextBridge Pro:
u
Make sure your scanner is connected, turned on, and compatible
with your system.
u
Close all other applications, especially anti-virus programs.
u
Log into your computer with administrator privileges if you are
installing on Windows 2000 or Windows NT.
t
To install TextBridge Pro:
1. Insert TextBridge Pro's CD-ROM in the CD-ROM drive. The
installation program should start automatically. If it does not start,
locate your CD-ROM drive in Windows Explorer and double-click
the
Autorun.exe
2. Choose a language to use during installation. The program interface
language is used for displays such as menu items, dialog boxes,
warning messages and so on. You can change the interface language
later from within TextBridge Pro 11.
3. Follow the instructions on each screen to install the software. All files
needed for scanning are copied automatically during installation.
Note
Sometimes uninstalling and then reinstalling TextBridge Pro will
solve a problem. See Uninstalling the software at the end of chapter 6.
B P
EXT RIDGE RO
program at the top-level of the CD-ROM.
I T B
N S T A L L I N G E X T R I D G E
P 1 3
R O