Lesson 1: Gooing Using Brushes - ScanSoft SUPERGOO User Manual

Lesson 1: GOOing Using Brushes

The GOO brushes let you smear, smudge, twist and generally distort
your image. Each of the brushes lets you distort the image differently.
In this lesson you'll use the GOO brushes to turn the face you created
in the FUSION Room into a caricature.
B
To smear an area of your image:
1. Click the top set of rainbow colored buttons. The GOO Brushes
palette appears.
The GOO brushes palette buttons.
These tools let you GOO specific portions of the image.
2. Click the Smear tool.
The Smear Tool.
24 Kai's SuperGOO User Guide
3. Drag the Size control slider down to reduce the size of the brush.
The Size control slider.
4. Move the cursor to the right corner of the mouth and pull down,
then to the side and up.
5. Repeat the move on the right side of the face.
The face after its been smeared.