ScanSoft KAI S PHOTO SOAP 2 User Manual page 131

Printing using an oval design.
Adjusting Print Settings
Sometimes you need to adjust the print settings to work correctly with your printer. If
there is a considerable offset, you may want to adjust the margins. Otherwise, you can use
Nudge to slightly shift all of dimensions. For example, if everything prints slightly to the
right of the expected positions, you can nudge the settings to the left to correct the
problem.
To adjust print settings:
1 Click the 123 button if needed, to display the print settings.
2 Adjust the following values as needed:
Change the values for the left, right, top, and bottom margins.
Change the Nudge All values if your printer is slightly off to shift all of the settings.
Change the Spacing values to adjust horizontal or vertical spacing.
Drag the margin and gutter guides to adjust them.
If you don't use all of the "slots" on a sheet of special paper such as labels, click the
tool button and change the number for 1st Position. This only affects the first page.
131