Valet Mode; Remote Valet - Directed Electronics NONE AM5 Owner's Manual

Valet mode

You can prevent your system from arming, by using Valet Mode. This is
very useful when washing the vehicle or having it serviced. In Valet
Mode, the system will not arm, even with the transmitter, but all con-
venience functions (door locks, trunk release, etc.) will work normally.
To enter or exit Valet Mode with the integrated LED/Valet but-
ton:
Turn ignition to "on" position,
then turn to "off" position. Press
and release
LED/Valet button within 10 sec-
onds. The status LED will light
steady if you have entered Valet Mode. To exit Valet Mode, repeat the
steps above. The LED will turn off when exiting Valet Mode.

remote valet

Remote Valet is a convenient feature that makes bypassing the securi-
ty system easier. This feature makes it possible to exit or enter Valet
Mode using your factory keyless transmitter.
1. Open any door.
2. Press on the transmitter.
3. Press on the transmitter.
4. Press on the transmitter.
The status LED will stay on if you have entered Valet Mode, and it will
go out if you exited Valet Mode.
© 2008 Directed Electronics All rights reserved
the integrated
DRW-35
9