Blower Options - Thermador HMCB36FS Manual

CuS TOM I N SE RT S
P R O fE SSION AL SE R IE S CuS T O M IN S ERT (3 0" /36"/ 48")
VC I230 DS / V C I 2 3 6 D S / V C I2 4 8 D S
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Deep capture area allows for efficient capture of smoke
and steam
DESIGN
- Suitable for wall or island applications
- Stainless steel button controls
CAPACITY
- Choose from five blower options
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe aluminum mesh filters
- All-stainless steel baffle filters are available as an accessory
- Built-in Clean Filter Reminder light
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Choose from Inline, Remote or Integrated Blowers
Installation Note: Professional Rangetops and Ranges require that minimum distances
be maintained from the cooking surface to combustible materials (i.e. a wood covering
around the insert). These minimum distances range from 30" to 40" and can vary
from product to product and by manufacturer. Refer to the installation manual of the
rangetop or range prior to the design and installation of the custom hood insert.
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical

bLOWER OPTIONS

REMOTE
VTR630D – 600 CFM
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D* – 1000 CFM
INTEGRATED
VTI610D – 600 CFM
VTI1010D* – 1000 CFM
REMOTE bLOWER ACCESSORIES
Roofplate – RFPLT600
Roofplate – RFPLT1000
ACCESSORIES
VCI2REMFS –
Remote Control Panel
LINER_ – Custom Hood Liners
(30"/36"/48")
LINER30/LINER36/LINER48
*Please visit thermador.com for installation tips and details.
30", 36", 48"
Sold Separately—
See Blower Options Table
10" Round
Vertical
Mesh (Baffle filters sold
as an accessory)
30", 36" – 2 Bulbs
48" – 4 Bulbs
120V AC, 60Hz
See page 40 for further details.
Use RFPLT600 in
roof-mount applications
Use RFPLT1000 in
roof-mount applications
Inline blower can be used
for an integrated solution
See page 39 for further details.
Use with Remote Blower
VTR630D
Use with Remote Blowers
VTR1030D and VTR1330E
See page 38 for further details.
BAFFLT_ – Baffle Filters
(30"/36"/48")
BAFFLT30/BAFFLT36/
BAFFLT48
27