3.1) FAN: enter system fan status info layer.
Lamp Sensor: lamp sensor temperature
Lamp Fan Speed: lamp fan speed in RPM
Blower Speed: Blower fan speed in RPM
Power Sensor: Power sensor temperature
Power Fan Speed: Power fan speed in RPM
Fixed Fan Speed: Disable auto fan speed control and fix fan speed
3.2) PbPr: enter PbPr color control Layer.
When Source is YPbPr (Never Change these setting)
(Note these values Before Upgrade Software)
PbPr G Offset : combine with user osd brightness in YPbPr
PbPr G Gain: combine with user osd contrast in YPbPr
PbPr R Offset: offset of color red
PbPr G Offset: offset of color green
PbPr R Gain: saturation R
PbPr B Gain: saturation B
3.3) V9300R,G, B: Reserve for future use.
3.4) Color Temp: Reserve for future use.
41