LG RD-JT30 Service Manual page 21

7. Assemble Make sure TIR is exactly
TIR on Hsg contacted related datum of
hsg
8. Assemble 1. Follow the screw
Color Drum torgue
on bkt 2. avoid straight load
toward bearing
9. Assemble Avoid interfere with ROD
Color Drum during assembling
module on
HSG
Assemble 1.avoid interfere with color
cvr color drum
drum 2. Make sure CVR's
location is correct
Check interfere after
assembling
10. DMD
Module/En
gine Test
1. put glue 727 on 4 Hsg Datum
2. Put CA064 on bottom surface of
TIR
3. Assemble TIR on Hsg
Assemble color drum/ bd_sensor on
bkt motor mount
Assemble Color drum module on Hsg
Assemble CVR Color drum module
on Hsg
Assemble DMD/DMD_BD/ projection
lens on Hsg
Over Fill adjust
C/W delay adjust and Engine Test
Fix FM by glue
21
Glue 727
Activator A649
Screw torgue 1kgf
Screw driver
Screw driver
DMD contact Screw Driver(M2) for
Cspring contact DMD
Adjust three screws of
FM module
Senserand Oscilloscope
Screw Glue