Function
Screen Capture Function
1 . Press the MENU button. Then, move to OPTION with
the ∧, ∨, <, > buttons and press the ◉OK button.
2 . Press the ∧, ∨ buttons to move to Screen Capture
and press the ◉OK button.
•
It can only be elected when there is an input signal.
•
It takes up to 2 minutes when capturing screen.
•
Press the BACK button to exit the menu screen.
To adjust the brightness of the screen
1 . Press the Q.MENU button on the remote control.
2 . Press the <, > buttons to move to LED Mode.
3 . Move to a desired item with the <, > buttons.
•
LED Mode changes into Dimming mode automatically at specific temperatures (37°C or
higher). Dimming mode gets about 90% brightness of original led mode.
•
LED Mode changes into Dimming mode automatically if use a optical battery.
•
You can use this function through the MENU button.
•
Press the BACK button to exit the menu screen.
To make the power of the projector turn on automatically when power is in
1 . Press the MENU button. Then, move to OPTION with the
∧, ∨, <, > buttons and press the ◉OK button.
2 . Press the ∧, ∨ buttons to move to Auto Power and
press the ◉OK button.
3 . Press the ∧, ∨ buttons to move to On and press the
◉OK button.
•
On: Connecting DC cable to the projector turns on the projector.
•
Off: Connecting DC cable to the projector makes the projector in standby state.
•
Press the BACK button to exit the menu screen.
28
OPTION
Menu Language
: English
Blank Image
: Blue
Screen Capture
LED Mode
: Normal
Auto Power
: Off
Demo Mode
: Off
Initial Setting
: Home Use
LED Mode
Normal
OPTION
Menu Language
: English
Blank Image
: Blue
Screen Capture
LED Mode
: Normal
Auto Power
: Off
Demo Mode
: Off
Initial Setting
: Home Use
ꔂMove ꔉOK
ꔂMove ꔉOK