Specifications - Directed Audio 150 Owner's Manual

SPECIFICATIONS 150/250/400

RMS continuous power per channel, both chan-
nels driven into 4 ohms from 20 to 20,000 Hz,
with less than 0.08% Total Harmonic Distortion
@ 14.4 VDC
RMS continuous power per channel, both chan-
nels driven into 2 ohms from 20 to 20,000 Hz,
with less than 0.1% Total Harmonic Distortion @
14.4 VDC
RMS continuous power bridged into a 4 ohm
load from 20 to 20,000 Hz, with less than 0.1%
Total Harmonic Distortion @ 14.4 VDC
Dynamic power rating (IHF-202 Standard)
bridged into 4 ohms
Signal-to-Noise Ratio
Frequency Response
Damping Factor @ 4 ohm
Crossover
Bass Equalization
Input Impedance
Input Sensitivity
Output Impedance
Supply Voltage
Fusing and Power
Cable Requirements (AWG)
(Per amp, trunk mounted)
8
model 150 250
50
watts
75
watts
150
watts
200
watts
Greater than 95 dB
20-20,000 Hz ± 0.5 dB
Greater than 200
Switchable high or low pass
12 dB/octave, continuously
variable from 50 to 500 Hz
+8 dB, centered at 40Hz
20K ohms
Variable from 150 mV to 8 volt
2 to 8 ohms, stereo
4 to 8 ohms, bridged
10 to 16 VDC
20A
#12
400
75 125
watts watts
125 200
watts watts
250 400
watts watts
325 550
watts watts
25A 50A
#10 #8
© 1999 Directed Electronics, Inc