Starter Anti-Grind Circuitry; Disabling The Remote Start System - Directed Electronics Security System and Convenience 125xv User Manual

Security system and convenience

Table of Contents

IMPORTANT! Timer Mode should be used only in open areas. Never start

and run the vehicle in an enclosed space such as a garage or carport.

To exit timer mode, turn the ignition switch on any time the

engine is running. The parking lights will flash 4 times, indicating

timer mode has been exited.

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind cir-

cuitry prevents the starter from engaging, even if the key is turned

to the start position. This prevents damage to the starter motor if

the key is turned to the start position during remote start operation.

NOTE: Anti-grind circuitry only works when the remote start system is

operating the motor and the Failsafe

This feature allows your system's remote start unit to be tem-

porarily disabled to prevent the vehicle from being remote started

accidentally. This feature is useful if the vehicle is being serviced

or stored in an enclosed area. To disable the remote start, move

the shutdown toggle switch to the OFF position. The switch can be

installed in a location of your choice. Check with your installer for

recommended locations.

LOCATION OF SHUTDOWN SWITCH_________________________

Starter Kill relay is installed.

2004 Directed Electronics, Inc.

Table of Contents

Do you have a question about the Security System and Convenience 125xv and is the answer not in the manual?

Cyber 125xv