Directed Electronics Security System and Convenience 125xv User Manual page 25

When you are ready to drive the vehicle:
1. Insert the ignition key and
2. Press the brake pedal.
NOTE: If the brake pedal is pressed before the key is in the ON position,
the engine will shut down.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down
inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the OFF position.
■
The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
■
Transmitter button
vehicle.
2004 Directed Electronics, Inc.
©
turn it to the ON (not the
START) position.
is pressed again twice to start the
21