Advertisement
Quick Links
I.Unboxing
Step I: Remove
all the accessories
of the gantry frame and base, and remove the foam located at the bottom
platform.
Step 2: Remove the 4 fixing plates shown in the diagram,
the gantry frame and the base.
Anycubic
Quick
from
the foam,
then take out the components
and then separate
Fixing
Gantry frame
Kobra
2 Plus
Start
Guide
2.Machine
Installation
I) Install gantry frame
2)InstaII support rod
of the
3)lnstaII print head
4)lnstall Touch screen
5)lnstall filament
holder
6)lnstall filament
runout sensor
plates
Base
For more
detailed
provided
to access them.
o
tutorials
or usage
instructions,
please
APP
O
o
scan the QR code
• Help center
Advertisement
Related Manuals for AnyCubic Kobra 2 Plus
Summary of Contents for AnyCubic Kobra 2 Plus
- Page 1 Anycubic Kobra 2 Plus Quick Start Guide I.Unboxing 2.Machine Installation I) Install gantry frame Step I: Remove all the accessories from the foam, then take out the components 2)InstaII support rod of the gantry frame and base, and remove the foam located at the bottom...
- Page 2 3.Check Before 4.Leveling M02030329 press "Tools" - "Control" - "Auto Level". wait for the machine to complete 1)Pulley elastic adjustment leveling process. Check if the print head is shaking. If it is, adjust the hexagonal isolation column located underneath the print head until it slides smoothly and without shaking.
Need help?
Do you have a question about the Kobra 2 Plus and is the answer not in the manual?
Questions and answers