Remote Functions; Standard Configuration - Directed Electronics Intelliguard 750 Owner's Manual

remote functions

This system uses computer-based code learning to learn the remote
buttons. This makes it possible to assign any remote button to any sys-
tem function. The remote initially comes programmed with standard
configuration, but may also be customized using the CliffNet Wizard PC
program. The buttons in all of the instructions in this manual corre-
spond to a standard configuration remote.

standard configuration

Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output A is controlled by this button.
Button
Silent arm and disarm is controlled by this button.
Button
Remote start is controlled by this button.
Button, then
Accessory B output is controlled by these buttons.
Button, then
These buttons activate SmartWindows.
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
Button
Button
5