Download
Share
Print this page
Gevi GECME022-U Manual
  1. Manuals
  2. Brands
  3. Gevi Manuals
  4. Coffee Maker
  5. GECME022-U
  6. Manual
Gevi GECME022-U Manual

Gevi GECME022-U Manual

Espresso machines 20 bar fast heating commercial automatic cappuccino coffee maker with foaming milk frother wand for espresso, latte macchiato, 1.2l removable water tank
Hide thumbs Also See for GECME022-U:

Advertisement

Quick Links

Download this manual
TIPS:THE
FIRST
For a better
taste
and good for your
health, we suggest
you to rinse the
machine
and
release
the water
Fill
NOT
out.
up the water tank vertically
align the buckles to the hole on
the back of the machine,
press it down to be parallel
the top of the machine.
For a better
and good for your
health, we suggest
you to rinse the
machine
release
out.
TIME
OR A LONG
water
into
the
water
tank
Plug in the power cord, press
exceed
the
MAX
line.
Set
power switch to the "l"
and
position,all blue indicator
lights will flash as the
and
appliance starts heating.
to
TIME
NOT
Place a cup on the drip
tray, turn the knob to
the
far side"
"
taste
and
the water
USE THE
MACHINE
Press one of the
button.
Wait for a while,the
flow
outlet. After the water stop
flowing or wait about 1
minute, turn the knob back
water of the cup.
water
out from
the
coffee
to stope Pour away th

Advertisement

loading
Need help?

Need help?

Do you have a question about the GECME022-U and is the answer not in the manual?

Questions and answers

Related Manuals for Gevi GECME022-U

Summary of Contents for Gevi GECME022-U

  • Page 1 TIPS:THE FIRST TIME OR A LONG TIME USE THE MACHINE For a better taste and good for your health, we suggest you to rinse the machine release the water Fill water into water tank Plug in the power cord, press Place a cup on the drip Press one of the button.
  • Page 2 Fill water into water tank exceed line. up the water tank vertically align the buckles to the hole on the back of the machine, press it down to be parallel the top of the machine.
  • Page 3 Plug in the power cord, press Place a cup on the drip power switch to the "l" tray, turn the knob to position,all blue indicator far side" " lights will flash as the appliance starts heating.
  • Page 4 Press one of the button. Wait for a while,the water will flow out from coffee outlet. After the water stop flowing or wait about 1 minute, turn the knob back to to stope Pour away the water of the cup.
  • Page 5 TIPS: There may be loud noise when pumping water for the first time or after along time not used, it is normal that appliance releasing the air inside. After about 20s, the noise will be reduced.
  • Page 6 USE GUIDE 1: FROTH MILK ALONE TIPS BEFORE OPERATION TIPS BEFORE OPERATION NOTE Make sure to tear off the Fill water into the water tank When the water tank sealing tape from the bottom the water will flow NOT exceed the MAX line. Set up of the water tank.
  • Page 7 STEPS Please Plug in the power cord, press d up, indicato power switch to the "l" position turning water (the knob is on the" " position), If you otherwise all blue indicator lights will s and weak flash as the appliance starts the frot heating.
  • Page 8 NOTE When the water tank is pulled up, the water will flow out from outlet at the bottom of the water tank, as it is a movable part. If you have pulled up several times and have not wipe the water immediately, it will accumulate more and more...
  • Page 9 Plug in the power cord, press power switch to the "l" position (the knob is on the" " position), all blue indicator lights will flash as the appliance starts heating.
  • Page 10 Gevi Please wait until all the blue indicators stop flashing before turning on the steam, otherwise it comes out with weak steam which will influence the frothing effect. When the blue indicators stop flashing, it means the heating is finished, you can continue to operate step 4.
  • Page 11 ___•zn;l Prepare a pitcher with about 100ml of milk. Fill the pitcher with milk insert frothing nozzle into milk about 1-2cm. Turn knob side indicators will flash in white color. Steam will come from froth nozzle.
  • Page 12 Before making espresso, make sure the knob is in the middle" position which shows the machine is in standby mode.As the knob is a functional selection knob, if it is not in the" ", that means you have selected one of the function, which could not operate the following steps.
  • Page 13 NOTE 1. When the machine starts to work, there will be some noise out from the machine as it is pumping the water with high pressure 2.While during operation, if there is suddenly a loud noise from the machine, which maybe due to the water in the water tank is not enough for pumping.
  • Page 14 Froth milk in the way moving vessel round from up to down, after milk increase in volume by 2 times or the required purpose is reached, turn the knob " position to stop. back to the" Take away the frothing pitcher. If you want to power off the machine, press power switch to the "O"...
  • Page 15 NOTE During the milk frothing, if there is suddenly a noise and coming out with small steam. Please check whether the water enough and add water in time. When the water left the water tank is going to finish, it will produce a louder noise for pumping.
  • Page 16 NOTE When you finish frothing milk and turn the knob back to " if the temperature is lower, all the blue indicator will flash. pressure relief hole will make a loud noise with some steam coming out from the drip tray. It is because the machine relieving the pressure, which is normal and not a problem.
  • Page 17 (FOR LATTE) USE GUIDE 2: MAKE ESPREESO AFTER MILK FROTHING NOTE After finishing milk Place a mesh inside Faced up the Place a cup on Waiting for a The Manual function When all the blue Select "Manual" portafilter, make sure the frothing according to portafilter, then removable drip tray.
  • Page 18 Faced up the When all the blue portafilter, then Indicator stop installed in parallel flashing(the knob is on the " o" position), to the machine from it shows thieheating is "Insert" to "Lock" finished. Never skip to placed, otherwise step 5 before the blue coffee will Indicators...
  • Page 19 Place a cup on Select "Manual" removable drip tray. "1 shot"or '2 shot" (If the cup is tall, you according to the mesh can remove the drip you used. tray cover and put the cup into the drip tray) After blue indicators stop flashing.
  • Page 20 NOTE Waiting for a Pour the frothy milk The Manual function into the espresso. means the appliance wi II moment, Enjoy your Latte. NOT control the water espresso will flow amount for brewing out. Once desired amount of espresso espresso You can control is reached, press the amount of espresso of the...
  • Page 21 It's the " that means you have selected e o?thefunction, whichcouldnot not leaking. operate the following steps. Gevi Make sure to tear Off the sealing tape NOTE NOTE from bottom of the water tank. I.Not to make espresso Immediately after milk frothing.
  • Page 22 I.Not to make espresso Immediately after milk frothing. You should wait until the "HEATING" indicator becomes green, then continue to make espresso trom step 3 in the right side. 2. As with NTC precision thermostats, the espresso extraction temperature controlled at 197 OF,while the milk frothing temperature is at 2120F.
  • Page 23 STEPS Place a mesh inside the power Faced up portafilter, make surethe tube portafilter power onthemesh aligns withgroove installed e "l" in the portafilter. To achieve a to the m blue full flavor, 7g coffee powder is "Insert" best for one cup of espresso.To ghts will avoid leaking,coffee powder placed, o...
  • Page 24 NOTE When the water tank pulled up, the water will flow out from the outlet at the bottom of the water tank, as it is a movable part. If you have pulled up several times and have not wipe the water immediately, it will accumulate...
  • Page 25 Plug in the power cord, press power switch to the "l" position,all blue indicator lights will flash as the appliance starts heating.
  • Page 26 Place a mesh inside the Faced up the portafilter, make surethe tube portafilter, then onthemesh aligns withgroove installed in parallel in the portafilter. To achieve a to the machine from full flavor, 7g coffee powder is "Insert" to "Lock" best for one cup of espresso.To avoid leaking,coffee powder placed, otherwise should be tamped BELOW the...
  • Page 27 When all the blue Place a cup on indicator stop flashing removable drip tray. (If (the knob is on the " the cup is tall, you can position), it shows the remove the drip tray heating is finished. cover and put the cup Never skip to step 6 into the drip tray.) After before...
  • Page 28 Select "Manual" , "1 shot"or "2 shot" according to the mesh you used.
  • Page 29 Gevi NOTE NOTE 1. When the machine starts to The Manual function work, there will be some noise out means the appliance will from the machine as it ispumping NOT control the water amount for brewing the water with a high pressure.
  • Page 30 TIPS TIPS Waiting for a moment, Waiting for a moment, When you finish frothing milk When you finish frothing milk the espresso will flow the espresso will flow and turn the knob back to and turn the knob back to "...
  • Page 31 NOTE TIPS 1.The portafilter should be Duringoperation,if the removed after a while as the espressoisdripping out and machine need to relieve doesn'tflow smoothly.Please pressure. Otherwise,the steam check if the water is not will splash out because of the strong pressure.Please remove enoughand add water in time.
  • Page 32 USE GUIDE 4: FROTH MILK AFTER MAKING ESPRESSO(FOR CAPPUCCIN( NOTE NOTE NOTE L When the machine starts to Froth milk in the way moving After making the espresso Please wait until all the blue Prepare a pitcher with During the milk frothing, When you finish frothing milk Pour the frothy work, there will be some noise...
  • Page 33 Please wait until all the blue indicators stop flashing before turning on the steam, otherwise It comes out with a weak steam which will influence the frothing effect When the blue indicators stop flashing it means the heating is finished, you can continue to operate step 3.
  • Page 34 Prepare a pitcher with about 100ml of milk. Fill the pitcher with milk and insert the frothing nozzle into milk about 1-2cm. Turn knob to the far side " all the indicators will flash in white colorw Steam will come out from the froth nozzle.
  • Page 35 NOTE L When the machine starts to work, there will be some noise out from the machine as it is pumping the water with high pressure. 2.While during operation, if there is suddenly a loud noise from the machine which may due to the water in the water tank is not *enough for...
  • Page 36 NOTE Froth milk in the way moving During the milk frothing, if there is suddenly a vessel round from up to down, noise and coming out after the milk Increase with small steam. Please volume by 2 times or the check whether the water...
  • Page 37 NOTE When you finish frothing milk and turn the knob back to ", if the temperature is lower, all the blue indicator will flash. The pressure relief hole will make a loud noise with some steam coming out from the drip tray. It is because the machine relieving the pressure, which...
  • Page 38 Pour the frothy milk into the espresso. Enjoy your Cappuccino.
  • Page 39 TIPS: CLEAN MAINTENANCE TIPS: CLEAN MAINTENANCE Tips For Cleanning The Steam Nozzle Tips For Cleanning The Steam Nozzle Please mind the hot water and operate carefully, Please mind the hot water and operate carefully, In order to prevent In order to prevent the steam nozzle the steam nozzle from blocking and...
  • Page 40 Tips For Cleanning The Seal Ring Please mind the hot water and operate carefully, In order to prevent the seal ring from blocking and make it eaiser to clean, we suggest you to clean immediately after making epsresso.Here introduce you a quick method to clean as follows.