3. This appliance has been incorporated with a grounded plug. Please ensure the wall outlet in your house is well earthed. Gevi have focused on creating perfect home appliance 4. To protect against fire, electric shock and injury to persons do for our customer.
Page 3
Ensure the power cord do not touch hot surface of appliance. 21. This appliance is not intended for used by persons (including 10. Do not place the coffee maker on hot surface or beside fire in children) with reduced physical, sensory or mental order to avoid to be damaged.
the “INSERT” position, and you can fix them into coffee KNOW YOUR COFFEE MAKER maker firmly by turning it anticlockwise until it is at the (Product may be subject to change without prior notice) “LOCK” position. 3. Place an espresso cup (your cup) on removable cup shelf. Make sure the operation knob is on the “O”...
PREHEATING MAKING ESPRESSO To make a cup of good hot Espresso coffee, we recommend 1. Remove the metal funnel by turning it in clockwise, set you shall preheat the appliance before making coffee, including steel mesh into metal funnel. Add coffee powder to steel the funnel, steel mesh and cup, so that the coffee flavour can mesh with measuring spoon, a spoon of coffee powder not be influenced by the cold parts.
making the coffee, as you need operate manually sometimes! 3. Insert the froth device into the milk about two centimetres, 6. After finishing making the coffee, you can take the metal then turn the operation knob to the “ ” position, the funnel out by turning it clockwise, then pour the coffee steam indicator will be illuminated white.
PRODUCING STEAM TO HEAT LIQUIDS OR BEVERAGE SPECIAL FUNCTIONS The steam wand can be used to make hot beverages like 1. When the appliance is in steam function, if you turn the drinking chocolate, water or tea. operation knob to “ ”...
stores) instead of the descaler (the one hundred parts of water CLEANING AND MAINTENANCE and three parts of citric acid). 1. Cut off power source and let the coffee maker cool down 3. According to the program of pre-heating, put the metal funnel completely before cleaning.
Do not take apart the appliance by yourself if the cause of failure TROUBLE SHOOTING is not found, you had better contact certified serving center. Symptom Cause Corrections There is much water Please clean the drip tray. Water leaks in the drip tray. from the CORRECT DISPOSAL OF THIS PRODUCT bottom of...
Need help?
Do you have a question about the GECME003D-U and is the answer not in the manual?
Questions and answers