Espresso machines 20 bar fast heating super automatic coffee maker with foaming milk frother wand for espresso, latte maker with volume control for home (35 pages)
Page 1
Brewer | Grinder | Scales | Kettle Function Instruction Quick Use Manual GECME020DE-U GESCMA705-U Read this booklet thoroughly before using this coffee machine for the quick use. Read this booklet thoroughly before using this coffee machine for the quick use.
Bean hopper Capacity: 80g ⑤ Grind setting dial h Built-in Scale ⑥ Outer ring cap Thanks for purchasing our Gevi products. Gevi has focused on creating h Built-in Scale h other scales Description Specification ⑦ Inner ring cap perfect home appliances for our customers. In the past few years, it...
3. Important Safeguards 3. Important Safeguards Read these instructions carefully and retain them for future use. If this 8. Do not place on or near a hot gas or electric burner. machine is passed to a third party, then these instructions must be 9.
3. Important Safeguards 4. Introduction Of Control Panel - The longer cord should be arranged so that it will not drape Scale mode Fault reminder Setting over the counter top or table top where it can be pulled on by Home page Grind Pro mode Descaling mode...
4. Introduction Of Control Panel 5. Before First Use IMPORTANT Mode These parts are DISHWASHER SAFE: Icon Spoon ③ Stainless steel filter ㉔ Cone V60 PCTG filter ㉗ These parts are NOT DISHWASHER SAFE: Description Grind Pro Pour coffee Scale Kettle mode Descaling Bean hopper lid ①...
Page 7
5. Before First Use 5. Before First Use The machine’ s default setting is and max. 5 min. When the machine NOTE If the warning pops up, use “Beginner mode” . turns into sleep mode, the touch 1 - If the machine needs to be Kettle Mode Empty Water screen will become dark, the user...
Step 5 - Start the Heat water function 6.1 Brief Introduction of Kettle Mode. Under the grind pro function, the user can use the Gevi coffee machine as a 113℉ professional grinder. There are 4 ways to grind coffee beans - the Free mode, by Cups, by Time, or by Weight.
6. Grind Pro Function 6. Grind Pro Function NOTE Step 7 - Press to confirm , the Step 11 - The TFT touch screen ⑮ screen will show the third step: shows “ Grinding In Process” , and To adjust the Grind setting dial ⑤ from coarse to fine setting, do not rotate it forcedly and make sure there are no beans in the grinding the progress dial shows the process place container.
6. Grind Pro Function 6. Grind Pro Function 6.3 Grinding By Cups Mode To continue working, press Step 10 - Press to confirm it. “Continue” . If the user wants to CUP MODE “ ” (Following the operation under the “Beginner Mode” ) stop grinding, press “Finished”...
6. Grind Pro Function 6. Grind Pro Function Step 12 - The TFT touch screen ⑮ 6.5 Grinding By Step 2 - Press “ ” to select the Step 7 - Open the bean hopper lid ①, “Time” mode. and add beans into bean hopper ④. shows “...
Page 12
Built-in scale ㉑ Weight Limit: Max. 2500g Base Material: Die-casting ㉒ ㉓ Gevi logo Material: Aluminum plate Step 12 - Press to confirm, the screen will show the last step: Press Start. Stainless steel filter Double layer, reusable ㉔ Step 8 - Press to confirm, the...
6. Grind Pro Function 7. Pour Coffee Function 7.1 Brief Introduction NOTE Tips for all grinding modes. Function Coffee Mode Sub-mode Introduction for Modes 1. During the grinding, the machine will stop for 99s after every 99s of continuous grinding. After Under the “Machine 99s of standby, a beep sound advises that the Recipes”...
7. Pour Coffee Function 7. Pour Coffee Function The 3 pour-over coffee modes offer brewing cycles with different levels of user intervention in the coffee-making process, with Machine Recipes being the most automated, followed by My Recipes and Barista Mode. NOTE 1.
Page 15
7. Pour Coffee Function 7. Pour Coffee Function Step 3 - The screen will show “Select Step 6 - The default is “1 cup” , press Step 10 - Press to confirm it. like weighing beans and setting Preheat Function” . Press “Yes” , the icon to select desired coffee parameters to produce a faster the machine will be preheating...
7. Pour Coffee Function 7. Pour Coffee Function water amount). If the user wants to Step 23 - The TFT touch screen ⑮ Step 16 - Press “Start” , the machine stop brewing, press “Pause” and starts to grind beans. shows “Waiting-Heating”...
Page 17
7. Pour Coffee Function 7. Pour Coffee Function Step 7 - Press “Taring” to zero the the cup quantity that the user built-in scale ㉑. selected. The display shows the required amount. If the Weigh Powder required amount of water is being preheated, skip this part.) 10.0 NOTE...
7. Pour Coffee Function 7. Pour Coffee Function and a progression of brew time (the dark blue curve indicates the time-varying 7.4 My Recipes Mode brew speed; the light blue curve indicates the time-varying totally poured water amount). If the user wants to stop brewing, press “Pause” and then “ NOTE Continue”...
Page 19
7. Pour Coffee Function 7. Pour Coffee Function Step 5 - Press “ ” to select Step 9 - Add a desired amount of “Beans” . coffee beans,then press “Confirm” . Step 14 - Open the bean hopper lid Step 19 - The TFT touch screen ⑮ ①, and add beans into the bean hopper shows “...
Page 20
7. Pour Coffee Function 7. Pour Coffee Function processes, the user will sequentially Step 21 - Press “ ” to select the Step 23 - Do all the steps by following Step 27 - Press to confirm it. After set poured water volume, brew 93°C finish the steps, press “Confirm”...
Page 21
7. Pour Coffee Function 7. Pour Coffee Function Step 31 - Select your brew speed, and then press “Confirm” . Select Your Pause Time Step 34 - Press “Start” to pass into next step. Brew Speed Range Brew Speed RangeTemperatures Selected Water Temperature Brew Speed 90ml...
7. Pour Coffee Function 7. Pour Coffee Function Then scroll to the bottom of the page, the interface will show to the user two options: “Cancel” and “Save” . The “Cancel” means that the recipe name and bean information will not be saved, and the interface will be back to homepage directly;...
7. Pour Coffee Function 7. Pour Coffee Function Step 12 - Press to confirm it. Then NOTE “No” , the machine will not preheat press “ Start” , the machine starts to the water. If the user chooses “Yes” , must grind beans.
Page 24
7. Pour Coffee Function 7. Pour Coffee Function Step 17 - Add water into the water Step 12 - Do all the steps by following Step 10 - Press “ ” to select the tank ⑱ , and close the water tank the instruction.
7. Pour Coffee Function 7. Pour Coffee Function Using Powder with Other Scales Saved Recipes Step 4 - Press “ ” to select the Step 3 - Press “ ” to select “Saved mode of “New Recipe” . Recipes” . Step 1 - Press “...
Page 26
7. Pour Coffee Function 7. Pour Coffee Function Step 7 - Turn over the built-in scale Step 11 - Rotate the grind setting dial Step 16 - Press to confirm it, then cover ⑳ and put on the built-in scale ⑤...
Page 27
7. Pour Coffee Function 7. Pour Coffee Function 3. Using Powder with Built-in - If the user wants to delete the Step 22 - Press to confirm it. Then Step 24 - After finish heating, the Scale recipe, the user can hold and press press “...
7. Pour Coffee Function 7. Pour Coffee Function 7.5 Barista Mode - After finish modifications, there are three options: “Cancel” , “Save As New” , and “Save” . The “Save” means that modifications will be saved; the “Save As Barista Mode “ ”...
Page 29
7. Pour Coffee Function 7. Pour Coffee Function Step 11 - Press to confirm it. Step 16 - Press to confirm it. Step 19 - Press “ ” to select a desired brew ratio (accurate to one decimal place). The machine based on previous setting will give the user a currently available range of brew Step 7 - Press “Taring”...
Page 30
7. Pour Coffee Function 7. Pour Coffee Function Step 24 - Add water into the water Step 26 - The TFT touch screen ⑮ shows “Waiting-Heating” , and the progress dial Step 21 - Do all the steps by following tank ⑱, and close the water tank shows the heating temperature.
Page 31
7. Pour Coffee Function 7. Pour Coffee Function NOTE Spin speed (The machine also allows the user to change the spin speed of the water spouts at 4 different speed levels, and the speed levels are labeled as XF (Fastest, around 15s/round), F (Fast, around 20s/round), M (Medium, around 25s/round) and S (Slow, around 30s/round).
7. Pour Coffee Function 8. Scale Mode Function Step 5 - Weight readings will be shown Step 33 - To check the saved recipe details, please refer to Page 46 SAVE RECIPES. NOTE on the screen, and then touch NOTE For Scale mode, there is no “Finished”...
9. Kettle Mode Function 9. Kettle Mode Function Step 5 - After setting temperature and warm-keeping duration, press “Start” to heat NOTE water. During water heating, temperature can be paused or continued. For Kettle mode, there is no difference between “Beginner Mode” and “Master Mode”...
9. Kettle Mode Function 9. Kettle Mode Function 2. Frequent overheating will probably shorten the machine's lifespan. 3. To exit warm-keeping function, press the Finished or Homepage button. 4. The machine will automatically exit warm keeping function when time is up or due to water shortage. 5.
9. Kettle Mode Function 10. Descaling Function NOTE Be sure to unplug this machine before cleaning and let the machine cool down completely. To protect against electrical shock, do not immerse cord, plug or unit in water or liquid. Step 5 - The pump starts to pump water. If needs to pause pumping water, the - A clean coffee machine is essential for making great-taste coffee.
Page 36
If the problem still exists, perform flow meter calibration, see page 83 Troubleshooting 17. If the problem finally cannot be solved, contact Gevi Customer Care. Step 1 - To confirm descaling, press “ ” to select the “Descaling” mode.
11. Cleaning And Maintenance-Grinder 11. Cleaning And Maintenance-Grinder - Deposits of grinds & oils build up over time, affecting the taste of the coffee & NOTE operation of the integrated Grinder. 1. To prevent the risk of injury, unplug the machine before cleaning. - If the Grinder is used frequently (everyday), the Burrs need to be cleaned to ensure 2.
Page 38
11. Cleaning And Maintenance-Grinder 11. Cleaning And Maintenance-Grinder Step 4 - Grab the outer ring cap ⑥ and mount it to the grinder when its dot is NOTE aligned with the dot on the grinder. When assembling the grinder, do not miss any part, especially the spring, removable burr and latch plate.
Page 39
12. Cleaning And Maintenance-Brewer 12. Cleaning And Maintenance-Brewer 12.1 Every Time Step 1 - After operating the “Pour coffee” and “Kettle mode” functions, it is recommended to empty the water tank every time to keep dry. Step 2 - The machine is in the READY state for all features. 12.2 When Required Step 3 - On the homepage, Press “...
Page 40
(motor speed 3. The flowmeter only one time. flowmeter, contact grinder motor. works inaccurately. measurement) are Gevi customer care. (Pop-up message) correctly connected with the power board . 4. Check whether the lead wire of the grinder motor is...
Page 41
Descaling indication Please clean the The content of fault if cumulative poured water tank ⓲, refer pops up every two water exceeds to the section of minutes until the 50,000mL. Descaling “ ” in fault is solved. 13. Troubleshooting 13. Troubleshooting FUNCTION (Pop-up message) INSTRUCTIONS.
Page 42
2) Check whether (Pop-up message) short-circuited. the touch screen there is a short motherboard is circuit between the works. NTC(thermostat) of the water tank 13. Troubleshooting 13. Troubleshooting 4) Replace with a ⑱ and the power new power board board. and test to check whether the power 3)...
Page 43
If the being used. 2. If the machine is problem finally can- connected to a 3. Please contact lower voltage, it not be solved, contact with the authorized service facility for will not function Gevi Customer Care. assistance. normally.
Page 44
(Test Distance 1m) (repeat Step 2). 52dB If the problem still (without Beans) exists, contact Gevi Customer Care. Water Tank Capacity 640mL Failed flow meter Four spouts in total, three of them are in-line, 360° Water Spouts needs to be replaced.
Page 45
Glass Carafe (L*W*H) not transferable. Heat resistance: up to 302℉ Upon receipt of your claim, Gevi will seek to resolve your difficulties. Should Reusable Stainless Steel Filter your product develop any defect within 12 months of purchase because of Paper Filter...
Page 46
15. Warranty - servicing or modification of the product other than by Gevi or an authorized Gevi service center; - use of the product with other accessories, attachments, product supplies, parts or devices that do not confirm to Gevi specifications; or - exposure of the product to abnormally corrosive condition.
Need help?
Do you have a question about the GECME020DE-U and is the answer not in the manual?
Questions and answers