Data Objects - Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1 Manual

Table 9: API Data Objects (continued)
Data Type
ObjectMetadataType
ObjectIdOrNameType
DomainIdOrNameType
SubObjectDataType
ObjectDataType
ObjectType
StatusCodeType
AuthTokenType
SequenceType
Copyright © 2010, Juniper Networks, Inc.
Description
This complexType data code has the following sequence:
domainId = ID of the domain (type = unsignedShort)
category = Schema name of the category (type = string)
objectId = Object identifier (type = unsignedInt).
objectName = Name of the object (type = string).
objectVersionId = Identifier of the object version (type = unsignedInt).
lowDBVersionId= Lowest database version identifier (type = unsignedInt).
highDBVersionId= Highest database version identifier (type = unsignedInt).
This complexType data code takes only one of the following inputs:
objectId = Object identifier (type = unsignedInt).
or
objectName = Name of the object (type = string).
This complexType data code takes only one of the following inputs:
objectId = Object identifier (type = unsignedInt).
or
objectName = Name of the object (type = string).
This complexType data code has the following sequence:
subCategory = Subcategory under "category" (type = string).
data = Subobject data (type = OpaqueDataType).
This complexType data code has the following sequence:
objectName = Name of the object (type = string).
data = Object data (type = OpaqueDataType).
subObjectData = Data of the subobject (type = SubObjectDataType).
This complexType data code has the following sequence:
objectMetadata = Metadata object (type = ObjectMetadataType).
objectData = Object data (type = ObjectDataType).
This simpleType data code has the following possible enumeration values:
Success = Request is successful.
Failure = Request has failed.
This complexType data code is the security header for SOAP API calls. It has one value:
Token = String identifying the user (type = string).
This complexType data code is a partial response type. It has the following sequence:
SequenceNum= Sequence number of the current response (type = int).
IsDone = Total number of response messages (type = Boolean).
Chapter 3: Data Objects
19