Table of Contents
Advertisement
Network and Security Manager 2010.4 API Guide
Table 7: Job Service API Operations (continued)
Operation
ImportDeviceRequest
GetConfigSummaryRequest
GetRunningConfigRequest
12
Description
Request to import a device configuration from physical devices.
Request: JobRequestType
jobName= Name of the job.
scheduleTime= Time when the job will run. If not specified, the job will
run immediately.
jobArgs= List of the devices to which the job applies.
Response: JobResponseType
status = Job status.
jobName = Name of the job.
response = Response to the job.
Request for a summary of the configuration currently running on a physical
device.
Request: JobRequestType
jobName= Name of the job.
scheduleTime= Time when the job will run. If not specified, the job will
run immediately.
jobArgs= List of the devices to which the job applies.
Response: JobResponseType
status = Job status.
jobName = Name of the job.
response = Response to the job.
Request for the configuration currently running on a physical device.
Request: JobRequestType
jobName= Name of the job.
scheduleTime= Time when the job will run. If not specified, the job will
run immediately.
jobArgs= List of the devices to which the job applies.
Response: JobResponseType
status = Job status.
jobName = Name of the job.
response = Response to the job.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
- Juniper SSG 20-WLAN
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1 and is the answer not in the manual?
Questions and answers