Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1 Manual page 134

Network and Security Manager 2010.4 API Guide
116
:
ImportDeviceRequest importDeviceRequest = new ImportDeviceRequest();
String jobName = getUniqueJobId(import_device);
System.out.println("importDeviceRequest: jobName " + jobName);
JobRequestType jobRequest = getJobRequest(jobName, reader);
importDeviceRequest.setJobRequest(jobRequest);
importDeviceRequest.setAuthToken(authToken);
ImportDeviceResponse importResponse =
stub.ImportDeviceRequest(importDeviceRequest);
JobResponseType jobResponse = importResponse.getJobResponse();
StatusCodeType opStatus = importResponse.getStatus();
String jobID = jobResponse.getJobName();
String status = jobResponse.getStatus().toString();
System.out.println("JobName: " + jobID + " opStatus: " + opStatus +
" status: " + status);
assertTrue(opStatus == StatusCodeType.Success);
//Cancels the job:
System.out.println("Cancel job " + jobID + "now");
CancelJobRequest cancelJobReq = new CancelJobRequest();
cancelJobReq.setAuthToken(authToken);
cancelJobReq.setDomainId(jobRequest.getJobArgs().getDomainId());
cancelJobReq.setJobName(jobID);
CancelJobResponse cancelJobResp = stub.CancelJobRequest(cancelJobReq);
System.out.println("JobName: " + jobID + " opStatus: " +
cancelJobResp.getStatus());
} catch (Exception e) {
e.printStackTrace();
}
}
Copyright © 2010, Juniper Networks, Inc.