Table 14: Firewall Data Elements - Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1 Manual

Table 14: Firewall Data Elements

Data Element
name_
rules_collection
rowcountperrule_collection
next_preferred_id
pol_name
customOptions_collection
comments
enabled
group_address
rb-link
vpnlink
direction
dialupvpn
src_addr_collection
negate_src
dst-all-vip
dst_addr_collection
negate_dst
service_collection
action
Copyright © 2010, Juniper Networks, Inc.
Description
Name of the policy type.
Collection of all sets of rules.
Row count per rule in the collection.
Next preferred ID.
Rule title.
Custom options.
Comments about the firewall collection.
Collection enabled.
Rule group ID. (string)
Rule group name.
VPN link associated with the policy type.
Policy direction.
RAS VPN.
Address of the traffic source.
Negates the specified source.
All VIPs. (Boolean)
Destination address for the traffic.
Negates the specified destination.
Configure the services supported by the destination. If the service of the network traffic matches
a service selected in the rule, the security device performs the action that you select in the Action
column. For more information, see "Service (service_collection)" on page 54.
Determines the action to be performed by the security device when it detects traffic that matches
the rule. The possible values are:
deny
permit
reject
tunnel
Chapter 5: Security Data Model
35