Receiving Faxes Automatically: Faxonly Mode - Canon Color imageCLASS 8180c Facsimile Manual

- <DRPD> to distinguish between fax and voice calls by using Distinctive Ring Pattern
- <Manual> for the connected telephone to ring for fax and voice calls. Fax calls must
NOTE
If you set <5. MAN/AUTO SWITCH> to <ON> in <RX SETTINGS> in <FAX SETTINGS>
of the Menu, the machine will receive faxes automatically even when the receive mode is
set to <Manual>. (See <5. MAN/AUTO SWITCH> of "Menu Descriptions," on p. 8-5.)
5
Press [Stop/Reset] to return to the standby display.
NOTE
You can save the toner consumption when printing out the received documents. (Refer to
Chapter 10, "Machine Settings," in the Basic Guide.)

Receiving Faxes Automatically: FaxOnly Mode

5
If you want to select <FaxOnly>, check the following:
■ Select This Mode If:
•
you have a dedicated telephone line for fax use only.
•
you only want to receive faxes automatically with the machine.
■ You Will Need to:
set <FaxOnly>. (See "Setting the Receive Mode," on p. 5-1.)
■ When You Receive a Fax Call
The machine will receive the fax automatically.
■ When You Receive a Voice Call
You will not be able to answer the call.
NOTE
•
If you connect a telephone to the machine and enable the <INCOMING RING> setting,
the telephone will ring when the machine receives a voice call, and then you can answer
the call.
•
You can select the number of rings. (See <4. INCOMING RING> of "Menu Descriptions,"
on p. 8-5.)
5-2 Setting the Receive Mode
Detection.(See "Receiving with a DRPD (Distinctive Ring Pattern Detection) Service:
DRPD," on p. 5-5.)
be answered manually. (See "Receiving Faxes Manually: Manual Mode," on p. 5-7.)