Canon Color imageCLASS 8180c Facsimile Manual page 37

NOTE
•
You will need to connect a telephone to the machine if you want to talk to the recipient
before sending a document.
•
You cannot use the platen glass for manual sending.
1
Connect a telephone to the machine if you want to talk to the
recipient before sending a document.
For details on how to connect a telephone to the machine, refer to "Connect the
telephone cable," in the Quick Start Guide.
2
Load the document in the ADF ➞ press [FAX].
For details on the types of documents you can fax, their requirements, and how to load
documents, refer to Chapter 3, "Document Handling," in the Basic Guide.
3
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality
(Fax Resolution)," on p. 4-5.)
•
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan
Density)," on p. 4-5.)
4
Press [Hook] or pick up the handset of your telephone.
NOTE
Make sure to confirm the dial tone before entering a fax number. If you enter the number
before the dial tone can be heard, the call may not connect, or the wrong number may be
dialed.
5
Dial the recipient's fax/telephone number.
For details on the different dialing methods, see "Dialing Methods," on p. 4-6.
NOTE
You cannot use group dialing for manual sending.
6
Talk through the handset to the recipient.
If you press [Hook] in step 4, you can pick up the handset when you hear the recipient'
voice.
If you hear a high-pitched signal instead of the recipient's voice, go to step 8.
Sending Methods 4-3
4