Transmission To The Ftp Server - Konica Minolta bizhub PRESS C6000 Scanner Manual

6.4

Transmission to the FTP Server

6.4 Transmission to the FTP Server
When you send the scanned data to an FTP server, necessary procedures depend on whether the FTP server
is registered in advance or it is input manually.
d
Reference
Refer to the following pages.
When an FTP server is Already Registered: page 6-14
When an FTP server is Input Manually: page 6-16
When an FTP server is Already Registered
1
Press [SCAN] tab.
2
Press [FTP].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
3
Press the Name of the address FTP server.
% The selected destination is displayed in [List] at the left side of the screen.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Name by using [A to Z]. For more information on how to use [A to Z], refer to
page 6-2.
% To deselect the Name, press the selected Name again.
bizhub PRESS C7000/C6000
6
6-14