Using The Net Use Command - Epson C823781 - Net Print Server Administrator's Manual

Using the NET USE command

If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the printer, we recommend that you use
the NET USE command, as follows:
1. Click Start, click Control Panel, click Network and Internet
Connections, and then select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area
Connection icon.
3. Under Network Tasks, click Change settings of this
connection.
4. Check that Client for Microsoft Networks is installed. If it is
not installed, click Install to install it.
5. Run the command prompt and enter the following command:
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, click Control Panel, click Printers and Other
Hardware, and then click Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.
106
Installing the Printer Driver