Installation; Install The Drivers - D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual

1. With your computer on, insert the D-Link CD into your CD-ROM Drive. When the autorun screen appears, click Install.Drivers. If you
are installing this adapter in Linux, Netware, or FreeBSD, click View.Other.Drivers.
. Note: If the Autorun CD function does not automatically start on your computer, go to Start > Run. In the run command box type "D:\
Autorun.exe" (where D: represents the drive letter of your CD-ROM drive).
2. After a few moments, the Finish screen will appear. Click OK.
D-Link DGE-560T User Manual

Install the Drivers

5