D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual page 21
Product manual
Hide thumbs
Also See for DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter:
- Ethernet adapter (42 pages) ,
- Quick installation manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below.
Step.1
Windows
2000: Click on Start > Settings > Control.Panel > Network.Connections.
®
Windows
XP : Click on Start > Control.Panel > Network.Connections.
®
Windows Vista
: Click on Start > Control. Panel > Network. and. Internet > Network. and. Sharing. Center > Manage. network.
™
connections.
Step.2
Right-click on Local.Area.Connection which represents your D-Link network adapter and select Properties.
Step.3
Highlight Internet.Protocol.(TCP/IP) and click Properties.
Step.4
Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network or the LAN IP address on your
router.
D-Link DGE-560T User Manual
- Quick Links:
- Install the Drivers
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter and is the answer not in the manual?
Questions and answers