Installation - D-Link DW-655C User Manual

Installation

Installation for Windows 95, Windows 98 and Windows 2000
Before installing the driver, you will need a copy of the operating system installation media,
usually a CD supplied with your computer or operating system.
On Windows 98 systems, the installation files are sometimes archived on the hard disk in
C:\WINDOWS\OPTIONS\CABS. On Windows 2000 systems, the system may prompt you
to load operating system files from the Windows 2000 installation disk. Installation under
Windows 95 is identical to the procedure given above for Windows 98 and Windows 2000.
Only Windows 95 OSR2 or higher is supported.
The Setup program also installs Configuration Utility in the DW-655C Wireless LAN PC
Card in the Program directory. This configuration utility can help you to understand and
maintain your Wireless LAN.
Install Driver
Step 1: Turn on your computer.
Step 2: Insert the D-Link DW-655C Wireless LAN PC Card into the PC Card slot. Align the
card properly before putting it in the slot. Insert the card firmly without forcing until it seats
snugly.
CAUTION: Forcing a misaligned card into the slot can damage the computer or the card.
Step 3: Windows finds a new hardware shown DLINK-DW655C and asks for the driver of
DW-655C Wireless PC Card. The driver installation wizard guides you through the steps
standard for your operating system.
Step 4: You will be asked to supply CDs or directory path information for the driver. This
driver shall be located in the following directory.
D:\DW655C\ (if D:\ is your CD-ROM drive)
Step 5: Windows finds the driver described as D-Link DW-655C Wireless LAN PC Card.
Follow the directions of Windows dialog boxes to complete the driver installation. After
completing the installation, Windows dialog will display Systems Setting Change and ask to
restart the notebook. Click "Yes" to reboot the computer.
- 3 -