On The Test Strip Vial; If The Code On The Meter Does - Lifescan ONETOUCH ULTRA2 Owner's Booklet

3. Match the code on the meter with the code

on the test strip vial

If the code on the meter does not match the
code on the test strip vial, press
match the code number on the test strip vial.
The new code number will flash on the display
for three seconds, then briefly stop flashing,
after which the display will advance to the
APPLY BLOOD
If the codes already match, press
the
APPLY BLOOD
make a change after five seconds, the display
will advance to the
meter is now ready to perform a blood glucose
test.
test strip vial is essential to obtaining accurate results. Each time you
test, check to make sure the code numbers match.
12
screen.
screen. When you do not
APPLY BLOOD
CAUTION:
Matching the code on the meter and the code on the
or to
to go to
screen. The