Resetting The Temperature Cutoff Switch; Remote Control; Battery Installation - Dimplex MULTIFIRE DF3215 Practical User's Manual

RESETTING THE TEMPERATURE CUTOFF SWITCH

Should the heater overheat, an automatic switch will turn the heater off and it will not come
back on without being reset. The temperature cutoff switch can be reset by unplugging the
unit, waiting 5 minutes and plugging the unit back in.
CAUTION
If you need to continuously reset the heater, unplug the unit and call Dimplex North America
Limited at 1-800-668-6663 and press 4 for technical support.

REMOTE CONTROL

The remote control has a range of approximately 50 ft. (15.25m), it does not have to be
pointed at the fireplace and can pass through most obstacles (including walls). It is supplied
with 243 independent frequencies to prevent interference with other units.

BATTERY INSTALLATION

1. Depress tab on the battery cover on the back of the remote transmitter and remove
battery cover.
2. Install 3 AAA batteries into the remote control. (included)
3. Replace the battery cover.
NOTE
The remote transmitter has a battery backup time of 24 hours. The batteries can be removed
for up to 24 hours before the transmitter will require re-initialization.
SERIAL No.
XXX XX
Batteries
Initialization
Button
Indicator
3 Position
Light
Manual
Control
FIGURE 2
FIGURE 3
Main
On/Off
Switch
6