Remote Control Functions; Flame/Heat On/Off Button; Purifire On/Off Button - Dimplex MULTIFIRE DF3215 Practical User's Manual

REMOTE CONTROL FUNCTIONS

Room temperature
Set temperature
Day of week
Remote display
Up direction
button
Enter button
Left direction button
Flame/Heat ON/OFF
button
Purifire™ ON/OFF button
Occupancy
Sensor

FLAME/HEAT ON/OFF BUTTON

Press the Flame/Heat On/Off button
function is ON, the
When this icon is displayed, the red indicator light is activated on the firebox. The default
temperature setting is 72°F (22°C). Press the Flame/Heat On/Off button
Flame/Heat function OFF.
NOTE
When using the remote control the heater runs on a thermostat. Press the
keys to adjust the set temperature. Once the desired set temperature is reached the heater
will turn OFF. The heater will cycle ON and OFF to maintain the desired set temperature.

PURIFIRE ON/OFF BUTTON

Press the Purifire™ On/Off button
function is ON and the Heater
indicator light is activated on the firebox. The default setting for the Purifire™ is set at low
speed. Press the Purifire™ On/Off button
NOTE
To turn the Flame/Heat and Purifire™ ON or OFF at the same time, press both
buttons simultaneously.
Sleep timer
Ambient Light
Sensor
to turn the Flame/Heat function ON. When the heater
icon is displayed on the remote control in the upper left hand corner.
to turn the Purifire™ function ON. When the Purifire™
icon is NOT displayed on the remote control, the green
Time of day
Low
Battery
Indicator
Right
direction
button
Down
direction
button
to turn the Purifire™ function OFF.
Batteries
FIGURE 5
to turn the
or direction
control
8