NETGEAR GSM7328FS - ProSafe Switch - Stackable Hardware Installation Manual page 28

Managed Stackable Layer 3 Switches GSM7328S and GSM7352S Hardware Installation Guide
After you connect a console to the switch, you will need to configure the switch.
The following documents are provided for this purpose:
• Quick Install Guide: Explains basic setup and configuration (provided as both
a print document and in PDF format on the NETGEAR CD).
• Command Line Interface Reference for the ProSafe 7300S Series Layer-3
Stackable Switches: Gives detailed examples of how to use the CLI, and is
located on the NETGEAR CD.
• Administration Manual for the ProSafe 7300S Series Layer-3 Stackable
Switches: Describes configuration tasks, and is located on the NETGEAR
CD.
3-12
v1.0, March 2006
Hardware Installation