D-Link DIR-645 User Manual page 59

Section 3 - Software Configuration
The following parameters will be available for configuration:
Obtain IPv6: Select this option to obtain the DNS Server
addresses automatically.
Use IPv6: Select this option to manually enter the DNS
Server addresses used.
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS:
Enter the secondary DNS Server address used
here.
The following parameters will be available for configuration:
Enable DHCP- Select this option to enable DHCP PD.
PD:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the '/64' subnet.
LAN IPv6 Link-
Displays the LAN IPv6 Link-Local address used
Local Address:
here.
D-Link DIR-645 User Manual 55