Schedules - D-Link DIR-645 User Manual

Section 3 - Software Configuration
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could
create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
The following parameters will be available for configuration:
Name: Enter the custom name for the new schedule rule
here. This name is used for identification.
Day(s):
To use every day in the week for this rule, select
the All Week option. To use only selected days for
this rule, select the Select Day(s) option and tick
the appropriate days used for this rule.
All Day - 24 hrs: To enable this rule to run 24 hours instead of only
a certain part of the day, tick this option.
Time Format: Select the appropriate time format to use here.
Start Time: If the All Day option is not selected, the user can
enter the starting time here.
End Time:
If the All Day option is not selected, the user can
enter the ending time here.
Click on the Add button to add this new rule to the schedule rules list.
Click on the Cancel button to discard the information and cancel the
rule addition.
In the Schedule Rules List section, the user can view the available schedule rules created. To edit an existing rule, click on the
entry, To remove an existing rule, click on the
D-Link DIR-645 User Manual

Schedules

icon of the specific entry.
icon of the specific
103