Sharp AX1200S - 22" SuperSteam Oven Installation Instructions Manual page 8

4 Secure EXHAUST DUCT BOTTOM to the shelf with 2 SCREWS (B) as shown in Figures 8-B.
STEP 9: FRAME ASSEMBLY INSTALLATION
1 Attach FRAME ASSEMBLY and tighten 4 SCREWS (C) as shown in Figure 9 and Figure 9-A.
SCREW (C)
SCREW (C)
BOTTOM PANEL of
FRAME ASSEMBLY
Pull bottom panel of FRAME ASSEMBLY toward you to remove or replace the drip tray.
For any other assistance or information about this product, please call SHARP's Customer Assistance Cen-
ter 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, NJ 07495-1163
SCREW (B)
Figure 8-B
SCREW (C)
FRAME
ASSEMBLY
Figure 9
®
8
SCREW (C)
Figure 9-A