Step 8: Oven Installation - Sharp AX1200S - 22" SuperSteam Oven Installation Instructions Manual

STEP 7: INSTALLATION OF EXHAUST DUCT RIGHT
1 Attach EXHAUST DUCT RIGHT to the right wall of the oven.
2 Tighten with 4 SCREWS (A) as shown in the Figure 7.
Figure 7

STEP 8: OVEN INSTALLATION

CAUTION: Never hold the handle when moving the oven. Two persons are required to install the oven.
1 Establish center line of opening and mark front edge.
2 Place the oven on a table or stand positioned in front of the cabinet where the oven is to be installed.
One person should hold the oven while the other connects it to the electrical outlet.
3 Install the oven into the shelf with adjusting
marked on front edge as shown in Figures 8 and 8-A. Then push the oven until the flange of EXHAUST
DUCT BOTTOM touches the edge of the wall or cabinet opening. Avoid pinching the cord between the
oven and any wall as shown in Figure 8.
Figure 8-A
EXHAUST DUCT UPPER
DIVIDE PLATE R
mark on EXHAUST DUCT BOTTOM to the center line
Flange
CL
Figure 8
7
SCREW (A)
EXHAUST DUCT
RIGHT
SCREW (A)