Table of Contents
Advertisement
Self-Cleaning
Self-Clean
Cycle Time Length
If you are planning to use the oven directly after a self-clean cycle remember to allow
time for the oven to cool down and the oven door to unlock. This normally takes
about 11/2hour. So a self-clean cycle (3 hours) will actually take about 41/2hours to
complete. The time remaining for the self-clean cycle will be displayed in the oven
control display.
To set the controls
for a
Self=Cleaning
cycle
1.
Be sure the oven door is closed.
2.
Turn both the selector and the temperature control knobs to Clean position.
3.
As soon as the control is set, the motor driven oven door lock will begin to close
automatically.
While the door is locking, the [
icon will flash and then will
remain visible for the entire self-clean cycle.
Note: Allow about 20 seconds for the oven door lock to close.
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the
oven when opening the door to
allow hot air or steam to escape.
DO NOT force the
oven door open. This can damage
the automatic door locking
system. Use caution and avoid
possible burns when opening the
door after the Self-Cleaning cycle
has completed. The oven may
still be VERY HOT.
When
the
Self-Clean
Cycle is Completed
1.
Turn the selector and the temperature control knobs back to Off position.
2.
Once the oven has cooled down for approximately
11/2HOUR, the oven door can
then be opened. While the door is unlocking, the
icon will flash and then will
disappear from the oven control display.
Stopping
or Interrupting
a Self=Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive
smoke or fire in the oven:
1.
Turn the selector and the temperature control knobs to Off position.
2.
The oven door can only be opened after the oven has cooled down for approximately 11/2HOUR.
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and
temperatures.
If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual
oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting
that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an
adjustment is needed.
To adjust
the over= temperature
ConyCo_wt
1.
Press and hold the _
button until "00" appears in the oven control display.
2.
To increase the temperature
use the
button to enter the desired change; and to decrease the temperature use the
button (a minus sign will appear in the display indicating the temperature is decreased).
3.
Wait 5 seconds for the change to be accepted by the oven control.
Note: The oven temperature adjustments made with this feature will not change the Self-Clean or Broil temperature.
Once the temperature has been changed, the temperature indicator will still display the value set from the
temperature knob but the actual temperature in the oven will be higher or lower.
15
Hide quick links:
Advertisement
Table of Contents
