Changing The Network Encryption Key For One Unit At A Time - NETGEAR XAV2001 - Powerline AV Ethernet Adapter User Manual

XAV2001 Powerline AV Ethernet Adapter User Manual

Changing the Network Encryption Key for One Unit at a Time

If the Powerline Utility does not detect all the devices in your network, you must connect your
computer to each Powerline device and set up the network encryption key one adapter at a time, as
follows:
1. From the Advanced Settings tab, click the Security arrow.
2. Select the first Powerline adapter in your network.
3. In the Select an Encryption Key area, type the network encryption key that you want to
assign to the adapter in the Create a new Encryption field.
4. Click the Apply Security to Selected Devices button.
5. Repeat for each device in the network.
6. Select the Device Settings tab to automatically scan for Powerline Devices.
Check that the utility detects all the devices that have been individually set to the same
network encryption key.
B-4
v1.0, November 2009
Troubleshooting