Device Settings Tab - NETGEAR XAV2001 - Powerline AV Ethernet Adapter User Manual

Device Settings Tab

When launched, the Powerline Utility opens to the Device Settings tab. If all devices are not
shown, click the refresh button to detect all Powerline Adapters on your network.
By clicking the LED status light you can toggle the LED between on and off.
Figure 2-6
Note: You may see a message at the bottom of the screen regarding the power saving
feature. If the unit goes into power saving mode, the Powerline Utility will not find
it. Keeping a connected Ethernet cable plugged into the device will keep it active.
Using the XAV2001 Powerline Utility
XAV2001 Powerline AV Ethernet Adapter User Manual
4
v1.0, November 2009
2-5