Device Settings Tab
When launched, the NETGEAR Powerline Utility opens to the Device Settings tab. Click the
Refresh button to perform a scan of your network devices.
Figure 2-6
Note: You may see a message at the bottom of the screen regarding the power saving
feature. If the unit goes into power saving mode, the NETGEAR Powerline Utility
will not find it. Keeping an Ethernet cable plugged into the device will keep it
active.
Using the NETGEAR Powerline Utility
XAV2501 Powerline AV+200 Adapter User Manual
4
v1.0, December 2009
2-5