File Criteria - Cisco 5520 - ASA IPS Edition Bundle Configuration Manual

Chapter 5 Setting Up CSD for Microsoft Windows Clients
Click OK.
Step 3
The dialog box closes and the new criterion appears as an entry in the Registry Criteria window inside
the Registry and File Criteria dialog box.
Click Add if you want to specify another registry key, refer to the next section if you want to specify a
Step 4
file criterion, or click OK to return to the Identification for <Location> pane.

File Criteria

In the File Criteria area of the Registry and File Criteria dialog box
to confirm the presence or absence of a specific file as a criterion for assigning the location you are
configuring for the remote client, or choose a criterion to be modified from the File Criteria area and
click Edit.
The Add or Edit File Criterion dialog box opens.
Figure 5-5
Configure a file criterion as follows:
Assign a value to the following mandatory attribute:
Step 1
•
OL-8607-02
String value field—Enter a string to compare with the String value of the registry key on the client
computer.
EXAMPLE Choose matches and enter Active if you want to ensure the following protective
software application is active:
HKEY_LOCAL_MACHINE\SOFTWARE\ <Protective_Software> \Status
Case sensitive—Check to require the String value of the registry key on the client computer to
match the case used in the String value field to satisfy the criterion.
Add File Criterion
Entry Path—Enter the directory path of the file required to be present on or absent from the client
system.
Note Refer to the subsequent attribute descriptions for examples File paths.
(Figure 5-3), click Add if you want
Figure 5-5 shows the Add File Criterion dialog box.
Cisco Secure Desktop Configuration Guide
Defining Location Criteria
5-11