Using Asdm To Enable Or Disable Csd - Cisco 5520 - ASA IPS Edition Bundle Configuration Manual

Chapter 2 Enabling and Disabling CSD
15585 bytes copied in 3.710 secs (5195 bytes/sec)
[OK]
F1-asa1(config-webvpn)#

Using ASDM to Enable or Disable CSD

Enabling CSD loads the CSD configuration file (data.xml) from the flash device to the running
configuration. If you transfer or replace the data.xml, disable and then enable CSD to load the file.
Disabling CSD does not alter the CSD configuration.
Use ASDM to enable or disable CSD as follows:
Choose Configuration > VPN > WebVPN > CSD Setup.
Step 1
The CSD Setup pane opens
Figure 2-1
Note
OL-8607-02
(Figure
CSD Setup (Enable/Disable)
The Secure Desktop Image field displays the image (and version) that is currently installed. The
Enable Secure Desktop check box indicates whether CSD is enabled.
2-1).
Cisco Secure Desktop Configuration Guide
Using ASDM to Enable or Disable CSD
2-3