TP-Link JetStream TL-SG3424P Cli Reference Manual page 22

Primary mode once it is
connected
User EXEC
switch.
Mode
Use
command to enter this
mode from User EXEC
Privileged
mode.
EXEC Mode
Use
command to enter this
mode from Privileged
Global
EXEC mode.
Configuration
Mode
Use the interface type
number command to
Interface
enter this mode from
Configuration
Global
Mode
mode.
Use the vlan database
VLAN
command to enter this
Configuration
mode
Mode
Configuration mode.
Note:
1. The user is automatically in User EXEC Mode after the connection between the PC and the
switch is established by a console port or by a telnet connection.
2. Each command mode has its own set of specific commands. To configure some commands,
with the
TP-LINK>
the
enable
TP-LINK#
the
configure
TP-LINK(config)#
TP-LINK(config-if
Configuration
TP-LINK(config-
from Global
vlan)#
Use the exit command to disconnect the
switch (except
connected through the Console port).
Use the enable command to access
Privileged EXEC mode.
Use the exit command to disconnect the
switch (except
connected through the Console port).
Enter the disable command to return to
User EXEC mode.
Enter configure command to access
Global Configuration mode.
Use the exit or the end command or
press Ctrl+Z to return to Privileged
EXEC mode.
Use the
command
Configuration mode.
Use the vlan database to access VLAN
Configuration mode.
Use the end command or press Ctrl+Z
to return to Privileged EXEC mode.
Enter exit command to return to Global
)#
Configuration mode.
A port number must be specified in the
interface command.
Use the end command or press Ctrl+Z
to return to Privileged EXEC mode.
Enter the exit command to return to
Global configuration mode.
9
that the switch
that the switch
interface type number
to access interface
is
is