Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 15 Manual page 2

Advanced KDFX
Navigating KDFX
Studio
Figure 15-1
To select a studio, go to the main Effects page if youÕre not already there (from Program mode,
press Effects to go into Effects mode), and move the cursor so the studio name is highlighted.
EffectMode|||||Xpose:0ST|||||<>Channel:1|
FX|Mode:Master
FX|Chan:None
Studio|:2|HallFlngCdD|Room||
Effect|:1|Sweet Hall
Wet/Dry:0%Wet
Dither|:Medium||||||DigOut|:16|Bit
Octav-|Octav+|Panic|||||||||Chan-||Chan+
FXBus
When the studio is highlighted, pressing Edit goes to the Studio Editor (EditStudio) level, and
the FXBUS page. There are four FXBUS pages, one for each FXBus in the studio. These four
buses are the inputs to KDFX, and receive the output from the K2600Õs sound engine, as deÞned
on the OUTPUT page in the Program Editor.
Select the desired FXBUS page using the Channel / Bank Up and Down buttons. If you have just
entered the Studio Editor, the Þrst FXBUS page you see will be the one for FXbus1. Once you are
15-2
Studio|
Effects Mode
Edit
Input D
Input C
Input B
Input A FXBus 1
(if mono)
Edit
algorithm
param 1
The KDFX User Interface
Insert FX
FXBus 4
AuxFX
FXBus 3
FXBus 2
Edit
algorithm
param1
<more>
param 2
Name Save
FX Preset (1-4)
<more>
Save
Output Name
<more>
param 2 Name Save Delete Dump
FX Preset (Aux)
Delete Dump
Delete Dump