Quick Access Banks-Kurzweil (Qa Kurz) - Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 10 Manual

If the Zeros Memory Bank is Currently Selected
Bank Range
Command
MC 0 or 32: value 0
None
MC 0 or 32: value 0
MC 0 or 32: value 1
MC 0 or 32: value 1
MC 0 or 32: value 2
Remember that in the Zeros memory bank, the Quick Access bank IDs go through 75. So if the
Zeros memory bank is the current memory bank, you can send MC 0 or 32 values as high as 7
for the bank range command. And you can send PCH values as high as 99 for the bank/bank
entry command. (When youÕre in the other memory banks, you can send MC 0 or 32 values of 0
or 1, and PCH values of 0 to 99.)
If the 200s Memory Bank is Currently Selected
Bank Range
Command
None
MC 0 or 32: value 0
MC 0 or 32: value 0
MC 0 or 32: value 0
MC 0 or 32: value 1
MC 0 or 32: value 1
MC 0 or 32: value 2
Quick Access Banks—Kurzweil (QA Kurz)
This works almost exactly like the QA Ext format. The only exception is that within the
QA Kurz format, the K2600 expects the bank range command to be a PCH, and not MC 0 or 32.
MIDI Controller 0 or 32 messages are not recognized. The K2600 expects to receive PCHs of
value 0Ð99 to select a bank and entry, or a pair of PCHs, the Þrst having a value of 100Ð107 to
select a different 10-bank range.
QA 0–127
Finally, thereÕs the QA Bank format for use with older MIDI devices (program change
commands 0Ð127 only). It works similarly to the other QA formats, but the allowable range of
values is limited to 0Ð107.
QA Banks and General MIDI Files
The K2600 isnÕt a General MIDI (GM) instrument, but if you load the GM Þles from the
accessory disks, the K2600 automatically conÞgures itself to make it easy for you to call up the
Bank / Bank Entry
Resulting Selection
Command
No change (K2600 interprets this as QA bank 0, entry 6.
PCH: value 6 There is no QA bank 0. Lowest valid PCH value in this
case is 10, which would select QA bank 1, entry 0)
PCH: value 9 Entry 9 in current QA bank
PCH: value 32 QA bank 3, entry 2
PCH: value 4 QA bank 10, entry 4
PCH: value 28 QA bank 12, entry 8
PCH: value 44 QA bank 24, entry 4
Bank / Bank Entry
Resulting Selection
Command
PCH: value 44 QA bank 204 or 214; entry 4
PCH: value 6 QA bank 200, entry 6
PCH: value 32 QA bank 203, entry 2
PCH: value 99 QA bank 209, entry 9
PCH: value 4 QA bank 210, entry 4
PCH: value 28 QA bank 212, entry 8
PCH: value 44 No change; MC 0 or 32 value 2 is invalid in 200s bank.
MIDI Mode
Program Change Formats
10-15