Root; Parent; Open; Pressing Open On Directories - Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 Musician’s Manual Supplement

Once you have selected one or more files, press OK to perform the disk function (in this
example, Load) on all files marked with an asterisk, whether or not they are visible on the
screen. If there are no files marked with an asterisk, the function will operate only on the
highlighted entry, as in earlier versions of the K2000 system software.

Root

The Root soft button returns the listing to the top-level or root directory. If the display is already
at the root directory (as indicated by the
effect of pressing Root will be reset the file index to1 if there are files in the directory.

Parent

The Parent soft button is used to go up one level in the directory hierarchy. If the display is
already at the root directory, this button will have no effect.

Open

Pressing Open on Directories

The Open soft button performs a different operation depending on the disk function and the
type of file that is currently indexed in the display. In all disk functions, pressing open on a
subdirectory (indicated by a
display the file list.
When a directory is first opened for viewing, the index will be set to one (the first file in the list).
You might notice that the K2000 remembers the index the previous directory you were in before
you pressed Open, so that if you return to that directory by pressing Parent, you are put back
where you were in the list. This index is only remembered for one level down, and therefore is
useful when stepping through a list of subdirectories from a single directory level.

Pressing Open on Files

In the Load function, pressing open for a standard .KRZ file will start the Load Object feature.
This allows selected individual objects from the file to be loaded in to the K2000. If Open is
pressed on a macro file (.MAC extension), then individual file entries within a macro file can be
selected for loading. Both of these features are explained in great detail below.
For all other functions, if Open is pressed when cursored to a .KRZ or a .MAC file, the object
file or the macro file will be opened for viewing. For instance, pressing Open on a .KRZ file
while in the Delete function will display the objects within the file in a scrollable list, however no
delete action will be possible on the individual objects.
OK
Pressing this soft button will cause the K2000 to proceed with the selected function. After
pressing OK, there may be further dialogs such as bank specification (for the Load function),
confirmation (for Delete), or name entry (for Rename).
One exception to this is in the Load function, if the file list is scrolled to a directory (dir) entry,
then the OK button will enter the directory, the same as if the Open button is pressed on a
directory entry.
Dir: \ field on the top line of the display) the only
after the file name) will open that directory, read in and
(dir)
Disk Mode Enhancements in Version 3
File List Dialog
4-7