The Misc Page; The Erase Track Dialog - Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 Musician’s Manual Supplement

The Object soft button accesses some useful database functions while still in Song mode, before
you actually save the current song. Pressing Object jumps you directly to the Object Utility (see
page 4-63). When you press Done on the Utility page, you will be returned to the
Save|New|Song?
The Rename, Save, and Cancel soft buttons function the same as they do in all other editors.

The Erase Track Dialog

This dialog asks you if you are sure you want to erase a specific track. The track number will
correspond to the track currently selected by the cursor position. When RecTrk is set to Multi or
None, the Erase track function looks to the cursor position to determine the track to erase. If the
cursor is positioned somewhere other than the Track or Channel fields, Erase will have no effect.
Erasing a track will not alter the song's end point, nor will it remove any tempo events, since
these elements are common to all tracks in the song.
Yes erases all data on the selected track and returns to the MAIN Song Mode. The song will keep
the erased track record enabled, but it will be an empty track.
No aborts the erasing of the selected track and returns to the MAIN page in Song Mode, with all
previously recorded tracks intact.

The MISC Page

This page contains parameters that determine how the sequencer behaves during playback and
recording, and when the K2000 is connected to another MIDI sequencer. Most of these settings
are stored in the Master Object, (all except the Auto punch-in points) and none of these are
saved with the song.
SongMode:MISC||Events:186K|||STOPPED||||
RecMode|:Linear|Quant:Off|||CountOff:1||
PlayMode:Loop|||Grid|:1/8|||Click|||:Rec
KeyWait|:Off||||Swing:0%||||ClickCh|:16|
Locate||:||1:1||Sync|:Both||ClickPrg:198
AutoIn||:||1:1||Clock:Int|||ClickKey:C|4
AutoOut|:||1:1||Tempo:Auto||ClickVel:90|
Record||Play|||Stop|||New|||In/Out|MAIN|
RecMode (Recording Mode)
Play Mode
Key Wait
Locate
Auto In
Auto Out
Quant (Input Quantize)
Grid
Swing
Sync
dialog.
Parameter
Linear, Fixlen, Loop, Unloop, Auto
Linear, Loop, List, Chain
On, Off
-25:2 – 999:4
1:1 – 999:4
1:1 – 2500:
Off, 1% – 100%
1/1 – 1/384
-99% – 125%
Both, Xmit, Recv, Off
Range of Values
Song Mode and Sequencing
Default
Linear
Loop
Off
1:1
1:1
1:1
Off
1/8
0%
Off
The MISC Page
3-25