Pause; Stop; Erase; Misc - Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 Musician’s Manual Supplement

Pause

Pause and Play share the same soft button. Pause appears only when the song status is
PLAYING or RECORDING
button switches to Play), and the location remains at the current bar and beat, allowing you to
continue from that location by pressing Play again.
Pressing Pause while recording will stop the recording process as if you had pressed Stop.

Stop

Halts the playback or recording, and resets the song's location to either the default Bar 1, Beat 1
value, or to whatever location you defined with the Locate parameter. If the location is defined
as something other than Bar 1, Beat 1, press Stop twice to return to 1:1.
Pressing Stop when the song status is
dialog, and provides you with the opportunity to listen to the "new" song and compare it with
the "old," previously saved, song before answering Yes or No.
Here are two useful alternatives to using these button presses:
• Footswitches can be assigned to Play/Stop and Record/Stop. On the MIDIMode :
TRANSMIT page, assign either footswitch to controller number 102 or 103. Using controller
103, you can even record from within the Song Editor.
• You can use double button presses to mimic the Play, Pause and Stop soft buttons when the
actual buttons are not available. Use the cursor Left+Right double-press for Play/Stop, and
use the cursor Up+Down double-press for Play/Pause.

Erase

Removes all channelized data from the track on which the cursor is currently positioned (on
either the Track or Channel fields) or from the record enabled track if the cursor is positioned
elsewhere. A dialog appears that allows you to verify your intentions before permanently
erasing any data. The Erase function will not prompt the dialog or erase any data if an empty
track is selected.

MISC

Takes you to the SongMode : MISC page, which contains more sequencer parameters. These
miscellaneous controls include record and play mode settings, auto punch-in points,
quantization on input settings, tempo, and click attributes.

MIXER

Displays the MIXER page, a graphic representation of panpots and level faders for each track in
shown on the EditSong : MIX page. You can modify program changes, volume and pan position
on this page. Recording status can also be selected here.
. Pressing Pause while the song is playing will stop the playback (soft
RECORDING
Song Mode and Sequencing
Song Mode: The MAIN Page
will always prompt the Save|this|song?
3-23