Table of Contents
Advertisement
Display Reads
Parameter
.P-BEND
pitch wheel bend
.K-BEND
key pressure bend
soft pedal
.SFT-PDL
.L-SPLIT
left split point
.R-SPLIT
right split point
left region balance
.L-BAL
.R-BAL
right region balance
* If the value is numeric, you can also enter the value with the right button-pad and press ENTR.
See the sections on each parameter later in this chapter.
F1, F2, and F3 in the Program Editor
In the Program Editor, F1 initiates program renaming. F2 initiates program copying. and F3 deletes the current program, as
described below.
Renaming Programs
Undefined and user-created programs have the default name UNTITLED. To change the name:
1.
Press F1. The display will ask
RENAME PROGRAM?
Press 0 (yes) to continue the re-naming process, or press - to quit. If you press 0 (yes), the first letter of the current
name will start blinking. For instance, if the current name is UNTITLED, the U will start to blink.
2.
Press the INCR or DECR button. The letter will change to another character. For instance, the U in UNTITLED will
change to V or T, depending on whether you pressed INCR or DECR. Using these two buttons, you can select any of the
letters of the alphabet, the numbers 0 through 9, or the characters "/", "_", or "*". Choose the first character of the new
name in this way.
3.
To move to the next character position, press NEXT. Use INCR or DECR to repeat the process described in (2) above.
To return to a previous character position, press PREV.
4.
To exit, press F1.
Copying Programs
To copy the current program, press F2. The display will ask
COPY PROGRAM?
Press 0 (yes) to copy the program. The display will read:
COPY current-program number TO current-program number
Enter the program number you want the current program copied to, and press ENTR. Assuming the program number you
selected was empty, the program will be copied, and you will now be editing the program of the new program number.
If a program already existed under the number you selected, the display will read.
Table 6-1
Program Editor Parameters
Adjustable Range *
(use INCR and DECR)
60ST
60ST
30dB
C0-C9
C0-C9
15dB
15dB
6-2
What it Does
Sets the range and direction of the pitch bender.
Sets the range and direction of key pressure pitch bending.
Sets the range of the soft pedal.
Delineates the lower bound of the center region.
Delineates the upper bound of the center region.
Adjusts the volume of the left region.
Adjusts the volume of the right region.
Advertisement
Table of Contents
